Toggle switch for LED light bars 20A
You are buying 1x rocker switch.
Choose from the following:
LED light bar
Rear lights
Driving lights
Tray lights
Reverse lights
Spot lights
Fog lights
Zombie lights
Roof lights
Off road lights
Winch in/winch out
It can handle 20A at 12V so there is no need for a relay, Just wire 12V to the switch and to the lights.
It is a standard size to fit most push out modules in car dash boards.
LED back lit so the small light is on all the time for easy location.
Switch it on and the sign lights up in blue.
12V 24V Winch In Winch Out Rocker Switch (ON) - OFF - (ON) Blue
Press and hold to winch in or winch out. Does not stay on automatically. Returns to centre (off) position when released.
Specification:
Color: Black
Rated: 12V 20A / 24V 10A DC
Pin Number: 7 Pins
Light Color: Blue
Type: Double Pole Double Throw (ON) - OFF - (ON) switch
Surface size : 2" (50mm) x 1" (25mm)
Standard size mounting hole 1.41" (36mm) x .86" (22mm).
Features:
- Black hard surface rocker
- Laser etched WINCH IN WINCH OUT Legend
- Single upper light
- Single lower light
- Upper light is ON when the switch is pressed UP
- Lower light can be wired to separate dash light circuit
- Waterproof rating of IP66
- Same size as the other switches
- This switch uses the same light configuration as the other switches
- No rear barriers between terminals
- Wiring diagram is not supplied
It is a standard size to fit most push out modules in car dash boards. .
Switch the light on and the sign lights up in blue.