Changing colour USB TV led strips light
You are buying
1x Plug and Play Changing colour RGB led strip light and connectors. Plug and play
It connects in to a USB port or phone charger with USB output.
Fully plug and play, Plug one end in to a USB port, then using the included cables and connectors stick the strip on to where you want it.
Dont stick over the ventilation holes on the TV/monitor.
Control the colour with the remote, select from one single colour or put it to changing colour mode. You can also turn it off and sim with the remote.
1x RGB remote with battery
1x RGB controller
4x RGB strips 50cm long, cuttable
3x 30cm RGB strip joiners
7x Pin connectors.
LED: 5050 SMD LEDs
Power: 7.2W per meter
Beam angle: 120°
Note some older TV dont output enough power to the USB. If your tv is like this then you will need to use a USB power supply to power the strips or a 5v power supply.
Alternatively only plug 1-2 of the RGB strip in to the tv and or select one colour/dim the strip so it is not at full brightness.
Great for use behind a TV or Monitor, Plug it in to your PC and lay them under your desk, Shelf lighting, Car lighting and many more applications
See my other listings for the single colour strips.