Loading...
Add to Wish List On your Wish List
You are buying one LED flashing beacon with 30x 1W LED's. Water/weather proof.
12 month warranty
Choose:
Magnet mount or bolt mount . Bolt is 20mm long.
The LED's are long lasting with a life span of over 30,000 hours.
Specifications:
Works with 12v and 24v, (multi voltage)
30x 1W High power LED's with special lens to spread the light
26x selectable patterns with memory
Rugged polycarbonate base
LED colour AMBER
Size 250mm x 175 mm x 45mm high
Cable length 3m (magnet fix) or 20cm (bolt fix)
Meets ECE R65 Class 1, "E" mark
Installation instructions for bolt mount:
Mount to desired location. Connect red to positive via a switch so you can turn it on and off. Black to negative.
Touch the yellow wire to positive for one second to change the mode or connect up a second switch so you can change modes.
This has 2 modes that flash at 4 hertz (to comply with NZTA rules these modes are the only ones that can be used on the road) ECE R65 Class 1 Mode 1, rotating mode Mode 2, Side to side flashing
USE OF FLASHING LIGHTS AND BEACONS.: https://www.nzta.govt.nz/resou... Section 11 Flashing lights and beacons