LED WIRELESS TRAILER LIGHTS 12V
You are buying one pair of wirelessly connected trailer lights. Great for temporary installation on towed vehicles! 12v application only.
LATEST DYNAMIC INDICATOR SIGNAL MODE - SEE THE VIDEO!
In the box:
2x waterproof LED trailer lights with magnet fixing.
(Magnets have a thick rubber pad to prevent scratching of the towed vehicle)
1x 7 pin flat NZ/AUS trailer plug with wireless transmitter
1x USB charging cable with dual output (so you can charge both lights at once).
1x cigarette plug for charging
1x instruction sheet
1x carry case for storage while not in use
Fully charge the lights (2-2½ hours) using the cigarette plug supplied, or by using a reputable mobile phone charger.
Plug the 7 pin flat plug into the 7 pin socket of the tow vehicle.
Attach the two LED trailer lights to the towed vehicle.
Briefly press the switch on the back of each light. The white "ready" indicator will illuminate, and also the blue battery condition indicator.
Then press and hold the on/off button for thee seconds to activate the number plate light - if required.
Approximately 10 hours use per charge
Dimensions: 110mmx x 103mm x 37mm deep (67mm deep with magnet base)
Communication range: 30 metres
Battery capacity: 2600mAh.
Tough PC construction
Great for a trailer, caravan, horse float etc.
Shock and vibration resistant
No more blown bulbs and easy to install
This is another quality product manufactured by PRECISION LIGHTING.