Description

Makes for easy installation of all LED lights and lightbars. 

Wiring harness (single or dual output) complete with switch, 40A relay and 30A fuse.

Dual harness dimensions (approximate):

Relay to switch 2.4 metres

Relay to output 1: 1.0 metre

Relay to output 2: 1.95 metres

Dual wiring harness fitting instructions:

Fix the relay close to the battery.

Connect red wire from relay to +ve terminal on the battery.

Connect black wire from relay to -ve terminal on the battery (or earth).

Connect red wire from switch to +ve terminal on the battery.

Connect black wire from switch to -ve terminal on the battery (or earth).

Connect black wire from output cable to black wire (-ve) on the light bar.

Connect white wire from output cable to red wire (+ve) on the light bar

If only one output is being used, tape up the unused output terminals with insulation tape.

When using the switch to turn off the light bar, the relay will emit an audible click. This is normal.

Single harness dimensions (approximate):

Relay to switch 2.6 metres

Relay to output: 2.9 metres

Single harness fitting instructions:

Fix the relay close to the battery.

Connect red wire from relay to +ve terminal on the battery.

Connect black wire from relay to -ve terminal on the battery (or earth).

Connect red wire from switch to +ve terminal on the battery.

Connect black wire from switch to -ve terminal on the battery (or earth).

Connect black wire from output cable to black wire (-ve) on the light bar

Connect red wire from output cable to red wire (+ve) on the light bar

When using the switch to turn off the light bar, the relay will emit an audible click. This is normal